Application requirements for water-based composite adhesives


1. This product can be used directly, in order to improve the fastness and washing resistance, you can add 3-5% of the special curing agent, stir and use it evenly.

2. This product is suitable for roller coating, knife coating, etc. If the sponge adheres to the cloth, the rubberized surface is sponge. The amount of glue applied is 25-40g/M², which can be adjusted according to the requirements of different fabrics.

3. After the glue is applied, heat and press at 150-200°C for about 15 seconds, and rewind and leave it for 24 hours.

4. If the viscosity of the product is too high, add an appropriate amount of water to dilute it. Make sure to stir evenly after adding water.

5. The glue with curing agent should be used up within 4 hours, the effect is better, too long time will affect the fastness and washing performance.

Safety measures

If the product sticks to the skin, it can be washed with water and soap. If the product gets into the eyes, rinse with plenty of water. In severe cases, seek medical advice.

Storage and transportation

This product should be transported in a well-sealed package to avoid extreme heat and extremely cold environments. The storage temperature in winter should be higher than 0℃.